Today, homes are filled with many appliances and electronics that require protection from surges. To effectively surge protect all of your home’s equipment, Siemens developed FirstSurge, our commercial class total home surge protector. Siemens FirstSurge devices were designed with your safety in mind, to prevent surges before they enter into your home and damage your equipment. Installed at your load center to a spare two-pole 20A or 30A circuit breaker, Siemens FirstSurge offers three grades of robustness to ensure long operational life depending upon the storm activity where you live. The key to remaining surge protected is knowing when a surge protector needs to be replaced. The gap of time between a surge protector wearing out until it is replaced is the time when your home is vulnerable to being hit by surges. When FirstSurge wears out, its commercial class 3-stage notification (LEDs, Audible Alarm, and Red Flashing LED) and supplemental GRM diagnostics immediately alerts you that it needs replacing.
This type of notification results in a far shorter Mean Time Before Surge Protection Restoration (MTBSPR) when compared to standard whole house protectors equipped only with LED diagnostics. Knowing you are surge protected with commercial class protection gives you peace of mind that your appliances and electronics will always be surge protected. Make Siemens FirstSurge the first surge protector installed into your home.
- Designed to surge protect standard residential split phase 120/240 panels up to 400A, 50/60hz System Voltage.
- FirstSurge is Ground Reference Monitoring (GRM) equipped, notifying you a rare safety hazard exists due to a compromised electrical system neutral to ground bond. In this case, an audible alarm will beep, the green LED lights on the device will remain lit, and the red service light will flash.
- Conveniently and easily installs onto any branded load center when connected to a spare 2-pole 20A or 30A circuit breaker
Package Dimensions: 10″ L x 6″ W x 4″ H
Packaging Weight: 3lbs